Tel : +86-592-5927399
Email : Sales@powerstone-tec.com
2.4MW Europe Solar Double-post Ground
It is a bracket system used for installing solar panels on the ground, characterized by stability, efficiency, and strong adaptability.
Application |
ground |
Wind Load |
60m/s |
Material |
Steel&SUS304 |
Snow Load |
1.6Kn/m2 |
Region |
Asia |
Warranty |
10 Years |
Components of a Solar Double Post Ground Mounting System
Posts: The system typically uses two posts per row of solar panels. These posts are driven or anchored into the ground to provide stability.
Rails: Horizontal rails are attached to the posts. These rails support the solar panels and are usually made of aluminum or steel.
Mounting Clamps: These clamps are used to secure the solar panels to the rails. They ensure that the panels are firmly attached and can withstand environmental stresses like wind and snow.
Foundations: The posts are anchored into the ground using concrete foundations or ground screws. The type of foundation used depends on the soil conditions and the load requirements.
Tilt Kits: These allow for the adjustment of the angle of the solar panels to optimize their exposure to sunlight.
Considerations
Soil Conditions: The type of soil can affect the type of foundation needed. Sandy or loose soil may require deeper or more robust foundations.
Wind and Snow Loads: Ensure the system is designed to withstand local weather conditions.
Permitting: Check local regulations and obtain necessary permits before installation.
Cost: Ground-mounted systems can be more expensive than roof-mounted systems due to the additional materials and labor required.